EasyManuals Logo

Benchmark BW Series Manual

Benchmark BW Series
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
13
BW SERIES
4.2 CHECK THE FUEL LEVEL
WARNING!
Gasoline is highly flammable and explosive under certain
conditions. Refuel in a well-ventilated area with the engine
stopped. Do not smoke or allow open flames or sparks in the
area where the pressure washer is being refueled or where
gasoline is stored. Do not overfill the tank. Be careful not to spill
fuel when refueling. Wipe up any spilled gasoline and let the area
dry before starting the engine.
Gasoline substitutes such as gasohol are not recommended.
They may be harmful to the fuel system components.
1. Check the fuel level by removing the fuel tank cap to visually check the
level.
2. Add fuel until the level reaches 1.5" below the top of the neck. Tighten the
fuel cap securely after relling.
NOTE
Only use unleaded gasoline (Pump Octane 87 or higher).
Never use stale or contaminated gasoline, or an oil/gasoline mixture.
Avoid getting dirt or water into the fuel tank.
Do not use a mixture of gasoline containing methanol. This will cause
serious damage to the engine.
Use of gasoline with an ethanol content greater than 10% can damage
the engine and fuel system and will void the manufacturer’s warranty.

Table of Contents

Other manuals for Benchmark BW Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benchmark BW Series and is the answer not in the manual?

Benchmark BW Series Specifications

General IconGeneral
BrandBenchmark
ModelBW Series
CategoryPressure Washer
LanguageEnglish

Related product manuals