EasyManuals Logo

Benchmark BW Series Manual

Benchmark BW Series
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
31
BW SERIES
7.1 MAINTENANCE SCHEDULE
Maintain the pressure washer according to the maintenance schedule in this section.
NOTE
Service more frequently when used in dusty areas.
These items should be serviced by an authorized service center, unless
you have the proper tools and are mechanically procient. Refer to
manual for service procedures.
Before Each Use
General inspection
Check engine oil level
Check pump oil level
Inspect air lter
First 5 Hours
Change engine oil
Change pump oil
Every 50 Hours
Check and clean air lter
1
Check and clean sediment cup
Every 70 Hours
Change pump oil
Every 100 Hours or 12 Months
Change engine oil
2
Inspect/clean spark plug
Inspect/clean fuel line
1
Every 300 Hours
Replace spark plug
Replace air lter
Clean combustion chamber
3
Inspect/adjust valve clearance
3
Clean fuel tank and strainer
1
Replace if it cannot be adequately cleaned.
2
Change oil after every 100 hours or yearly, whichever comes rst. Service more
frequently when operating under heavy load or in high temperatures.
3
Recommend service to be performed by authorized service dealer.

Table of Contents

Other manuals for Benchmark BW Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benchmark BW Series and is the answer not in the manual?

Benchmark BW Series Specifications

General IconGeneral
BrandBenchmark
ModelBW Series
CategoryPressure Washer
LanguageEnglish

Related product manuals