17
BW SERIES
tank (BW3500 and BW3800) or into the container (BW4400) with the
detergent solution.
NOTE
The soap nozzle will draw detergent at a ratio of 1:25.
Hook Up the High Pressure Hose
1. Attach the end of the high pressure hose to the high pressure outlet on the
pump by pulling back on the collar of the female pump tting and inserting
the male hose end into it.
2. Attach the other end of the high pressure hose to the spray wand.
Hook Up the Water Supply Hose
1. Connect the garden hose by threading it onto the pump.
NOTE
Do not start the engine without the water supply connected and turned
on. Water supply must deliver at least 8.0GPM. Do not draw from
standing water supply. Water temperature must not exceed 100°F
(37.7°C).
To Next Page
Loading...
Need help?
General
