EasyManuals Logo

Benchmark BW Series Manual

Benchmark BW Series
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
33
BW SERIES
NOTE
Oil max. capacity:
BW3500: 600 mL
BW3800: 700 mL
BW4400: 1.1 L
SAE10W-30 oil is recommended for general use.
DO NOT OVERFILL.
NOTE
Do not tilt the pressure washer when adding engine oil. This could result
in overlling and damage to the engine.
Use high quality engine oil with strong detergents. Using non-detergent
or 2-stroke oil could shorten the engine’s working life.
Handle and store engine oil with care, avoid getting dirt or dust into the oil.
Do not mix different engine oils.
Before the engine oil falls below a safe level, the low oil alert system will
automatically shut off the engine. The low oil light will turn on.
To avoid the inconvenience of unexpected engine shutoff, check the
engine oil level as often as possible.
Maximum Oil Level
Minimum Oil Level
0°C
10 20 30 40 50-10-20-30
20
32°F
40 60 80 100 120
°C
°F0-20
15W-50
10W-30
Synthetic 5W-30
5W-30
Effective Viscosity Range of Engine Oils
8.6
8.6.2)Ta
aft
8.6.2)Take off the spark arrester
after the engine cool down.
8.6.2)Take off the spark arrester from th e
after the engine cool down.
Maximum Oil Level
Minimum Oil Level
0°C
10 20 30 40 50-10-20-30
20
32°F
40 60 80 100 120
°C
°F0-20
15W-50
10W-30
Synthetic 5W-30
5W-30
Effective Viscosity Range of Engine Oils
8.6
8.6.2)Ta
aft
8.6.2)Take off the spark arrester
after the engine cool down.
8.6.2)Take off the spark arrester from the
after the engine cool down.

Table of Contents

Other manuals for Benchmark BW Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benchmark BW Series and is the answer not in the manual?

Benchmark BW Series Specifications

General IconGeneral
BrandBenchmark
ModelBW Series
CategoryPressure Washer
LanguageEnglish

Related product manuals