Benchmark BW Series Manual

41
BW SERIES
 Drain the pressure washer of fuel and oil before being transported on
rough roads.
8.2 DRAINING THE FUEL TANK
1. Turn OFF the engine. Remove the fuel cap and the debris screen
underneath the fuel cap.
2. Empty the fuel tank using a siphon and an approved gasoline container.
8.3 DRAINING THE CARBURETOR
1. Turn OFF the engine and allow it to cool. Turn the fuel valve to OPEN.
2. Position a container under the carburetor drain screw. Loosen the drain
screw.
3. Allow fuel to completely drain and re-tighten the drain screw.
4. Turn the fuel valve to CLOSED.
Carburetor
Drain Screw
Container

Benchmark BW Series Specifications

General

Brand	Benchmark
Model	BW Series
Category	Pressure Washer
Language	English