7
Tower Light Status
The tower light located on the top of the Ticket Station will let you know from across the
room if something in the machine needs attention. You can further narrow the location of
the problem from outside the machine by looking at the LCD display on each door. The
door with the problem will have an error code on it. Here is what the lights indicate:
White Light Flashing indicates power and is used as an attraction so customers can
easily locate the machine
White Light Solid indicates that it is time to change the bag containing discarded tickets.
Red Light Solid indicates that there is a ticket taker problem. Refer to troubleshooting
section of this manual.
Yellow Light Solid indicates that there is a problem with the printer. This is most often
seen when a printer need paper. If the printers do not need paper, refer to the
troubleshooting section of this manual.
Ticket Taker General
Note: When a door is open for service, the lockout switch kills the 24V to the
corresponding door. This keeps the ticket taker from operating for safety. If you must
activate the power at the lockout switch for troubleshooting or programming, use caution
around the ticket taker belts and cutters. ALWAYS STAY CLEAR OF THE TICKET
CUTTERS.
Ticket Taker Overview
The ticket takers are comprised of 4 main parts plus the drive motor:
1. Ticket taker main body includes:
a. Ticket sense transmitter1
b. Lower urethane roller2
To Next Page
Loading...
Need help?
General