29Bend-Tech Dragon A150
Troubleshooting Guide
Torch
04
04
Torch
Torch
While the Customer can choose any type of plasma machine desired, Bend-Tech recommends
technical support for the Hypertherm unit. Customers who choose to use a plasma machine
other than Hypertherm will not receive the same level of technical support. Please refer to the
troubleshooting.
It is recommended that the air supply to the Hypertherm be equipped with a water and
particulate lter, an oil lter and an oil vapor lter.
The Hypertherm unit requires at least 110-120 psi at its air connection.
To Next Page
Loading...
Need help?
General
