Bender MRCDB423 Series - Error Code Meaning

MRCDB423
Alle Rechte vorbehalten. Nachdruck und Vervielfältigung nur mit
Genehmigung des Herausgebers. Änderungen vorbehalten!
© Bender GmbH & Co. KG
All rights reserved. Reprinting and duplicating only with
permission of the publisher. Subject to change!
© Bender GmbH & Co. KG
Fotos: Bender Archiv und bendersystembau Archiv. Photos: Bender archives and bendersystembau archives.
Bender GmbH & Co. KG
Londorfer Str. 65
• 35305 Grünberg • Germany
PO Box 1161 • 35301 Grünberg • Germany
Tel.: +49 6401 807-0 • Fax: +49 6401 807-259
E-mail: info@bender.de
• www.bender.de
BENDER
13. Error codes
If a device error occurs, error codes appear on the display.
Error code Meaning
E.01
Error measuring current transformer monitoring
Action: Check transformer connection for short circuit or interruption.
The error code will be deleted once the error has been eliminated and the reset button has
been pressed.
E.02
Error measuring current transformer monitoring during a manual self test
Action: Check transformer connection for short circuit or interruption.
The error code will be deleted once the error has been eliminated, the manual self test has
been run again (test button "T") and the reset button "R" has been pressed.
E…
Error codes > 02
Action: Perform a reset. Restore the factory settings of the device.
The error code will be deleted automatically once the error has been eliminated. Should the
error persist, please contact the Bender Service.