EasyManuals Logo

BENDIX BA-921 User Manual

BENDIX BA-921
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
COMPRESSOR TROUBLESHOOTING CHART (Continued)
SYMPTOMS CAUSE
REMEDY
7. Compressor leaks A. Improperly installed plugs A. Check torque of fittings and plugs and tighten as
coolant. and coolant line fittings. necessary. Over torqued fittings and plugs can
crack the head or block casting.
B. Freeze cracks due to B. Test antifreeze and strengthen as necessary.
improper antifreeze Check coolant flow through compressor to as
strength. sure the proper antifreeze mixture reaches the
compressor.
C. Faulty compressor C. If casting porosity is detected, replace the com-
(porous castings). pressor.
8. Compressor head A. Restricted discharge line. A. Clear restriction or replace line.
gasket failure.
B. Loose head bolts B. Tighten evenly to a torque of 265-292 inch
pounds.
C. Faulty compressor or head C. Check for rough or poorly machined head or
gasket. block surfaces. Replace compressor as
necessary.
BACK / RETOUR

Other manuals for BENDIX BA-921

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BENDIX BA-921 and is the answer not in the manual?

BENDIX BA-921 Specifications

General IconGeneral
BrandBENDIX
ModelBA-921
CategoryAir Compressor
LanguageEnglish

Related product manuals