EasyManua.ls Logo

BendPak Autostacker PL-6SR - Multi-Autostacker Operation and Controls

BendPak Autostacker PL-6SR
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Autostacker™ Parking Lift 67 P/N 5900002Rev. D August 2019
Operation
Before operating an Autostacker in your Multi-Autostacker lineup, make sure to check the Lift and the
surrounding area for safety. Refer to Preparing to Raise or Lower a Vehicle for a safety
checklist and operation instructions.
The Controls
Your Autostacker is operated via the Controls; the Controls used in your Multi-Lift setup are similar to
the Controls used with a standard Autostacker. Refer to The Autostacker Console for more
information.
WARNING Only one Autostacker can be raised or lowered at a time. Do not attempt to operate
more than one Lift at the same time; you will damage the Power Unit.
The following graphics show the Controls for a standard Autostacker and the Controls for each Lift in a
Multi-Lift configuration.
The Controls for a
single
Autostacker:
The Controls for
multiple
Autostackers (one per Lift):

Related product manuals