2
14,000 POUND CAPACITY, COMMERCIAL GRADE
FOUR POST AUTO / TRUCK LIFT
This instruction manual has been prepared especially for you.
Your new lift is the product of over 40 years of continuous research, testing and development;
it is the most technically advanced lift on the market today.
READ THIS ENTIRE MANUAL BEFORE INSTALLATION & OPERATION BEGINS.
RECORD HERE THE LIFT AND
POWER UNIT INFORMATION WHICH IS LOCATED
ON THE SERIAL NUMBER
DATA PLATES ON THE LIFT AND
ON THE POWER UNIT
Power Unit Model # _____________
Power Unit Date Of Mfg. _____________
Power Unit Serial # _____________
Max Operating Pressure __2,250 PSI
This information is required when
calling for parts or warranty issues.
PRODUCT WARRANTY
Our comprehensive product warranty means more than a commitment to you; it’s also a commitment to the value of
your new BendPak lift. For full warranty details and to register your new lift contact your nearest BendPak dealer or visit
http:/ / www.bendpak.com/ support/ warranty/
WARRANTY VOID IF DATA PLATE IS REMOVED.
MADE IN CHINA
MT20
Model Number Lifting Capacity Serial Number
Date of Manufacture Power Unit Number Volt. / Ph. / Freq. / Amp.
Description Rolling Jack Max. Air Pressure Max.
Cable Dia. Conn. Dia. Cable Lengths
DANGER!
Disconnect Power
Before Servicing.
A C
B D
Santa Paula, CA USA
www.bendpak.com
NOTE:
Every effort has been taken to ensure complete and accurate instructions have been included in this manual, however, possible prod-
uct updates, revisions and or changes may have occurred since this printing. BendPak Ranger reserves the right to change specica-
tions without incurring any obligation for equipment previously or subsequently sold. Not responsible for typographical errors.
To Next Page
Loading...
