To Next PageTo Next Page
Need help?Do you have a question about the BendPak HD-9XW and is the answer not in the manual?
General| Brand | BendPak |
|---|---|
| Model | HD-9XW |
| Category | Lifting Systems |
| Language | English |
Details PPE, capacity limits, operator training, and pre-use inspection.
Wiring must be done by electrician; electrical safety precautions.
Emphasizes using correct parts, training, PPE, and tools for installation.
Outlines electrician's responsibilities for power connection and safety switches.
Guides on choosing an appropriate installation site, floor requirements, and clearances.
Explains the function and operation of the lift's primary and slack safety lock systems.
Explains cable routing, sheave types, and proper connection points.
Lists cable lengths for each model and describes routing paths.
Details the specific steps for routing cables A and C.
Completes routing for cables A and C, connecting them to the tie plate.
Details routing for cables B and D, mirroring the process for A and C.
Highlights the risks of hydraulic fluid contamination and methods to prevent it.
Guidance on physically mounting the power unit to the lift post.
Specifies power requirements and electrician's role in connecting to power source.
Describes how to connect the lift to the facility's electrical system.
Guides on concrete specs, anchor bolt installation, plumbing, and shimming.
Instructions for drilling, cleaning holes, and inserting anchor bolts.
Guides on final anchor bolt installation, plumbing, shimming, and torquing.
Procedure for fine-tuning lift levelness by adjusting safety lock engagement.
Guides an operational test to verify lift functionality and safety lock engagement.
A comprehensive checklist before putting the lift into service.
Detailed steps for safely raising a vehicle onto the lift.
Step-by-step procedure for safely lowering a vehicle and driving it off the lift.
Common lift issues and their potential causes and solutions.
