BendPak HD-9XL User Manual

1645 Lemonwood Dr.
Santa Paula, CA 93060 USA
Toll Free: (800) 253-2363
Tel: (805) 933-9970
bendpak.com
HD-9 Four-Post Lift
Installation and Operation Manual
Manual P/N 5900123 — Manual Revision M — February 2020
Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.
⚠
DANGER
Read the entire contents of this manual before using this
product. Failure to follow the instructions and safety precautions in
this manual can result in serious injury or death. Make sure all other
operators also read this manual. Keep the manual near the product
for future reference. By proceeding with installation and operation,
you agree that you fully understand the contents of this manual.
Models:
• HD-9ST
• HD-9STX
• HD-9
• HD-9XL
• HD-9XW
HD-9ST shown.

BendPak HD-9XL Specifications

General

Frequency	60 Hz
Lifting Capacity	9, 000 lbs
Lifting Capacity (kg)	4, 082 kg
Outside Length Runways (mm)	4, 851
Max. Vehicle Width Recommended	96 in
Max. Vehicle Width Recommended (mm)	2, 438 mm
Height of Columns	96 in
Height Columns (mm)	2, 438 mm
Runway Thickness (mm)	127
Width Runways (mm)	508
Voltage	230V
Phase	1 Ph

Summary

Introduction and Overview

Safety and General Information

Covers shipping, general safety, symbols, liability, and electrical requirements for the lift.

Symbols

Explains hazard and informational symbols used throughout the manual.

Liability Information

Outlines BendPak's limitations of liability regarding equipment use and modifications.

Electrical Information

Details electrical requirements, safety precautions, and wiring considerations for installation.

Components and Specifications

Optional Accessories

Lists additional products available to enhance lift functionality and usability.

Installation Guide

Preparation and Planning

Covers essential preparation steps like tools, electrical planning, location, and orientation.

Physical Component Installation

Details installing major components like posts, crosstubes, ladders, and runways.

System Connections

Guides connecting hydraulic, air, and electrical systems, including fluid and power source.

Anchoring and Leveling

Covers electrical disconnects, anchoring procedures, and final leveling for stability.

Operation and Maintenance

Using the Controls

Explains how to operate the lift's controls for raising, lowering, and safety lock engagement.

Routine Maintenance

Outlines daily, monthly, and as-needed maintenance tasks for proper lift function.

Troubleshooting and Reference

Troubleshooting Guide

Provides solutions for common lift operational issues and problems.

Wiring Diagrams

Technical diagrams illustrating the electrical connections for various lift configurations.