BendPak HD-9 Series User Manual

1645 Lemonwood Dr.
Santa Paula, CA 93060 USA
Toll Free: (800) 253-2363
Tel: (805) 933-9970
bendpak.com
HD-9 Four-Post Lift
Installation and Operation Manual
Manual P/N 5900123 — Manual Revision N2 — November 2023
Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.
________________________________________________________________________________________________
⚠ DANGER
IMPORTANT Safety Instructions, save these instructions! Read the entire
contents of this manual before using this product. Failure to follow the instructions and
safety precautions in this manual can result in severe injury or death. Make sure all other
operators also read this manual. Keep the manual near the product for future reference. By
proceeding with setup and operation, you agree that you fully understand the
contents of this manual and assume full responsibility for product use.
Models:
• HD-9
• HD-9ST
• HD-9XL
• HD-9STX
• HD-9XW
• HD-9EWT
Original instructions in
the English language
HD-9ST shown.

BendPak HD-9 Series Specifications

General

Lifting Capacity	9, 000 lbs
Minimum Height (Lowered)	4.5 inches
Power Requirements	220 VAC / 60 Hz / 1 Ph
Runway Width	19" (483 mm)
Warranty	5 Years on Structure, 1 Year on Parts