BendPak HD-9ST User Manual

1645 Lemonwood Dr.
Santa Paula, CA 93060 USA
Toll Free: (800) 253-2363
Tel: (805) 933-9970
bendpak.com
HD-9 Four-Post Lift
Installation and Operation Manual
Manual P/N 5900123 — Manual Revision M — February 2020
Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.
⚠
DANGER
Read the entire contents of this manual before using this
product. Failure to follow the instructions and safety precautions in
this manual can result in serious injury or death. Make sure all other
operators also read this manual. Keep the manual near the product
for future reference. By proceeding with installation and operation,
you agree that you fully understand the contents of this manual.
Models:
• HD-9ST
• HD-9STX
• HD-9
• HD-9XL
• HD-9XW
HD-9ST shown.

BendPak HD-9ST Specifications

General

Brand	BendPak
Model	HD-9ST
Category	Lifting Systems
Language	English

Summary

Introduction

Safety First

Safety Considerations

General safety guidelines for HD-9 Four-Post Lifts.

Electrical Safety

Components and Specifications

Components

Identification of main lift parts.

Specifications

Detailed technical data for lift models.

Installation Guide

Installation Checklist

Step-by-step guide for lift installation.

Installation Procedures

Core steps for installing the lift.

Site Preparation

Location selection, clearances, and concrete requirements.

Power and Electrical Connections

Installing the power unit and connecting to power source.

Anchoring and Leveling

Securing posts and ensuring the lift is level.

Operation Procedures

Safety During Operation

Crucial safety checks before operating the lift.

Vehicle Lifting and Lowering

Procedures for lifting and lowering vehicles safely.

Maintenance and Troubleshooting

Maintenance Schedule

Recommended daily, monthly, and as-needed maintenance tasks.

Troubleshooting Common Issues

Solutions for common lift problems.

Technical References

Wiring Diagrams

Electrical schematics for lift models.

Parts Drawings

Visual representations of lift components and part numbers.