EasyManua.ls Logo

BendPak HD-12X-B User Manual

Default Icon
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION AND OPERATION MANUAL
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes to the
purchaser upon receipt from the carrier.
Consequently, claims for the material damaged in ship-
ment must be made by the purchaser against the trans-
portation company at the time shipment is received.
BE SAFE
Your new lift was designed and built with safety in mind.
However, your overall safety can be increased by proper
training and thoughtful operation on the part of the
operator. DO NOT operate or repair this equipment with-
out reading this manual and the important safety instruc-
tions shown inside.
Keep this operation manual near the
machine at all times. Make sure that
ALL
USERS read this manual.
12,000 POUND CAPACITY
COMMERCIAL GRADE
FOUR-POST LIFTS
Models:
HD-12SS-B
HD-12-B
HD-12X-B
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU
FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS
MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.
REV F 12-15 -07
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Toll Free 1-800-933-9970
Tel: 1-805-933-9970
Fax: 1-805-933-9160
1800-253-2363
Question and Answer IconNeed help?

Do you have a question about the BendPak HD-12X-B and is the answer not in the manual?

BendPak HD-12X-B Specifications

General IconGeneral
BrandBendPak
ModelHD-12X-B
CategoryLifting Systems
LanguageEnglish

Summary

Introduction and Safety Information

Read First Safety Briefing

Essential preliminary reading before operation.

Key Safety Instructions

Crucial safety guidelines that must be read and understood before operating.

Lift Assembly and Installation

Column and Cross Tube Assembly

Instructions for installing columns and cross tubes.

Leveling and Synchronizing Procedures

Steps for leveling the lift runways and synchronizing the lifting operation.

Operation, Maintenance, and Safety Checks

Lift Startup and Final Adjustments

Steps for initial startup, testing, and final adjustments of the lift.

Safe Lift Operation Procedures

Procedures for safely operating the lift, including raising and lowering.

General Safe Lift Operation

Comprehensive guide to safe operating practices for automotive lifts.

Related product manuals