BendPak HD-7W User Manual

1645 Lemonwood Dr.
Santa Paula, CA 93060 USA
Toll Free: (800) 253-2363
Telephone: (805) 933-9970
bendpak.com
Four-Post Lifts
Installation and Operation Manual
Manual P/N 5900041 — Manual Revision M — July 2019
Models:
• HD-7P
• HD-7W
Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.
⚠ DANGER
Read the entire contents of this manual before using this
product. Failure to follow the instructions and safety precautions in
this manual can result in serious injury or death. Make sure all other
operators also read this manual. Keep the manual near the product
for future reference. By proceeding with installation and operation,
you agree that you fully understand the contents of this manual.

BendPak HD-7W Specifications

General

Lifting Capacity	7, 000 lbs
Overall Length	170” / 4, 318 mm
Overall Width	135” / 3, 429 mm
Max Rise	72 inches
Maximum Lift Height	72 inches
Power Supply	220V / 1 Phase / 60 Hz
Minimum Height (Lowered)	4.5” / 114 mm
Power Requirements	220V / 1 Phase / 60 Hz
Drive-Thru Width	96” / 2, 438 mm

Summary

Introduction and Product Overview

Critical Safety Warnings for Lift Operation

Emphasizes the danger of improper installation, operation, or repair, and the need to read the manual.

Important Manual Sections

Safety and Electrical Information

Covers general safety rules, symbols, liability, and essential electrical requirements and precautions.

Installation Guide

Installation Safety and Tools

Site Selection and Preparation

Component Installation

Routing Cables and Lines

Details runway installation, cable routing, flex tube, air lines, hydraulic hose, and return line.

Power Unit and Electrical Setup

Covers installing the power unit, filling fluid, connecting flex tube, air valve, and power source.

Final Installation and Testing

Includes anchoring, leveling, accessories, lubrication, operational test, and final checklist review.

Lift Operation

Operational Safety Guidelines

Emphasizes critical safety checks and procedures to perform before and during lift operation.

Using Lift Controls

Raising and Lowering Vehicles

Maintenance and Troubleshooting

Troubleshooting Common Lift Issues