EasyManua.ls Logo

BendPak HD-7W - Site Selection and Preparation

Default Icon
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HD-7P / HD-7W Four-Post Lifts 14 P/N 5900041Rev. M July 2019
Selecting an Approach Direction
You need to pick an Approach, the direction you will drive Vehicles onto your Lift, near the beginning of
the installation process. It determines where your Ramps and Tire Stops go on the Lift and the Front
and Rear of the Lift.
Selecting an Approach does not impact your Power Post location choice.
In many cases, selecting an Approach is easy: the garage/shop has walls on three sides and an open
door on the fourth side. The open door is the Approach side. If your location has an open door on both
ends, pick one side to be the Approach side; install your Ramps on the Approach side and the Tire
Stops on the other side.

Other manuals for BendPak HD-7W

Related product manuals