HD-9 Series Four-Post Lifts 72 P/N 5900123 — Rev. N2 — November 2023
Lubricating the Lift
To properly maintain your lift and to provide years of service, it’s important to periodically inspect and
lubricate key areas as needed. There are several lubrication points on the Lift.
• Inside of the Crosstube Gussets. Inside each post where the Crosstube Gusset rides,
for a total of eight areas. (Lube with white lithium grease monthly).
• Under the Cable Sheaves. Sheave pins under the Powerside Runway (apply red lithium
grease during assembly and as required thereafter). Put a small amount of red lithium grease
on each lubrication point before you use the Lift and monthly after putting the Lift into service.
The following graphic shows the lubrication points on the lift.
To Next Page
