To Next PageTo Next Page
Need help?Do you have a question about the BendPak XpR-12C and is the answer not in the manual?
General| Brand | BendPak |
|---|---|
| Model | XpR-12C |
| Category | Lifting Systems |
| Language | English |
Highlights critical safety warnings and precautions for operating the lift.
Emphasizes reading the manual to prevent injury, death, or voiding warranty.
Agreement to understand and follow all installation and operation procedures.
Essential safety rules covering operation, work area, and maintenance.
Critical safety warnings regarding electrical work and power unit operation.
Ensures safeties engage properly before lift operation.
Critical check to ensure arm restraints function properly before operation.
Emphasis on inspecting and adjusting restraints before each use.
Mandatory step to re-install and torque the top carriage-stop bolt.
Essential safety notes regarding power unit operation, oil, and electrical hook-up.
Stipulates that all wiring must be performed by a certified electrician.
Instructions for properly installing safety labels for operator protection.
Steps for initial lift startup, checking components, and final adjustments.
Duties of owners and employers regarding operator training and lift maintenance.
Rules for daily inspection, training, and safe use of the lift.
Emphasis on confirming primary safety locks are engaged before entering the work area.
Instructions for safely raising the lift and positioning the vehicle.
Warning to ensure vehicle is not front or rear heavy and to select proper configuration.
Procedure and safety precautions for lowering the lift and vehicle.
Principles for safe and productive operation of automotive lifts.
Key areas that operator training should cover for safe lift use.
Essential safety practices during lift operation, including load limits and clearance.
Summary of critical danger warnings for lift operation and vehicle handling.
Identifies possible causes and remedies for a lift that fails to raise.
Diagnoses issues with the motor not running and remedies.
Addresses problems with the lift lowering slowly or not at all.
Diagnoses why a loaded lift fails to raise and provides solutions.
Identifies causes and remedies for a lift that cannot maintain its raised position.
