2
12,000 POUND CAPACITY SURFACE MOUNTED FULL-RISE SCISSOR LIFTS
This instruction manual has been prepared specically for you. Your new lift is the product of over 40 years of
continuing research, testing and development; it is the most technically advanced lift on the market today.
READ THIS ENTIRE MANUAL BEFORE INSTALLATION & OPERATION BEGINS.
RECORD HERE THE LIFT AND
POWER UNIT INFORMATION WHICH IS
LOCATED ON THE SERIAL NUMBER
DATA PLATES ON THE LIFT AND
ON THE POWER UNIT
Power Unit Model # _____________
Power Unit Date Of Mfg. _____________
Power Unit Serial # _____________
Max Operating Pressure __2,800 PSI___
This information will be required when calling for parts or warranty issues.
Only replace parts with BendPak approved parts.
PRODUCT WARRANTY
Our comprehensive product warranty means more than a commitment to you; it’s also a commitment to the value of your
new BendPak lift. For full warranty details and to register your new lift contact your nearest BendPak dealer or visit
http:/ / www.bendpak.com/ support/ warranty/
DANGER!
Disconnect Power
Before Servicing.
MT20
NOTE:
Every effort has been taken to ensure complete and accurate instructions have been included in this manual, however, possible product
updates, revisions and or changes may have occurred since this printing. BendPak / Ranger reserves the right to change specications
without incurring any obligation for equipment previously or subsequently sold. Not responsible for typographical errors.
To Next Page
Loading...
Need help?
General
