Need help?Do you have a question about the Beninca THINKY and is the answer not in the manual?
General| Brand | Beninca |
|---|---|
| Model | THINKY |
| Category | Gate Opener |
| Language | English |
Detailed list of terminal functions, inputs, and outputs for the control unit.
Adjusting operational values like closure time, motor operating time, and courtesy light.
Enabling or disabling specific operational modes like automatic closure, multi-flat, and rapid closure.
Configuration of the radio receiver for transmitter assignment and management.
Displays the total count of open and close cycles performed by the system.
Enables a maintenance request notice based on a set number of manoeuvres.
Restores the control unit to its default factory settings.
Automatically sets optimal operating values for the automation system.
Sets an access code to protect the programming menu from unauthorized changes.
Procedure for adding new transmitters without accessing the control unit directly.
Monitoring system status and input activations via the display.
Displays codes indicating faults like photocell errors or motor protection triggers.
Identification and purpose of fuses F1, F2, F3, and F4 within the control unit.
To Next Page
