Beninca TO.GO Series - Additional Channels

11
All the 4-channel ARC transmitters, with the exception of the clonable AK, have a further 5 transmission channels to select by
simultaneously pressing two keys. Channels from 5 to 9 are therefore obtained, according to the combination of keys selected.
Refer to the diagrams on this page, if necessary you can print the diagram and use it as a memo.
The combination of keys 1+2 is reserved for the hidden key function.
It is important, during the learning phase and during the transmission phase, that the pair of keys are pressed simultaneously,
otherwise the transmitter will send the code of the channel pressed first..
TRANSMITTER CLONING ADDITIONAL CHANNELS
>
188
I R I.T X
IRI.T X4VA | IRI.T X4AK
MEM2048ONE.2WO ONE.4WB CALLONE.2WB ONE.2WI
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
www.beninca.com/
page/iritx.html
ELECTRONIC COMMAND & CONTROL
TRANSMITTERS WITH DOUBLE CODING
4 channels
• 4-channel transmitter with an elegant, refined design,
made of high quality materials with distinctive finishing
• Front plastic parts have a double finish, which highlights
the contrast between glossy and matt, and a metal key ring
• 12 V battery for long lifespan
Additional memory
for up to 2048 codes.
For receivers
of the ONE series.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code, Rolling Code
and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
4-channel receiver with
full-range power supply
(115-230 VAC/DC) and
triple coding: Advanced
Rolling Code, Rolling
Code and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
Four-channel
GSM receiver, up to
4 automations control
without limits of distance.
Makes it possible to use
the device by means
of a mobile telephone.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
in box. 512 memorisable
codes.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
plug-in. 512 memorisable
codes.
Guide to the procedure of copying fixed
codes, enabling ARC codes and changing
coding. Watch the video.
Configurazione e lista
dei canali disponibili:
hidden
button
188
I R I.T X
IRI.T X4VA | IRI.T X4AK
MEM2048ONE.2WO ONE.4WB CALLONE.2WB ONE.2WI
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
www.beninca.com/
page/iritx.html
ELECTRONIC COMMAND & CONTROL
TRANSMITTERS WITH DOUBLE CODING
4 channels
• 4-channel transmitter with an elegant, refined design,
made of high quality materials with distinctive finishing
• Front plastic parts have a double finish, which highlights
the contrast between glossy and matt, and a metal key ring
• 12 V battery for long lifespan
Additional memory
for up to 2048 codes.
For receivers
of the ONE series.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code, Rolling Code
and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
4-channel receiver with
full-range power supply
(115-230 VAC/DC) and
triple coding: Advanced
Rolling Code, Rolling
Code and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
Four-channel
GSM receiver, up to
4 automations control
without limits of distance.
Makes it possible to use
the device by means
of a mobile telephone.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
in box. 512 memorisable
codes.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
plug-in. 512 memorisable
codes.
Guide to the procedure of copying fixed
codes, enabling ARC codes and changing
coding. Watch the video.
Configurazione e lista
dei canali disponibili:
hidden
button
184
HAPPY VA
HAPPY.2VA | HAPPY.4VA
ONE.2WO ONE.4WBONE.2WBFLIP.2 FLIP.4 ONE.2WI
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
www.beninca.com
/page/happy.html
ELECTRONIC COMMAND & CONTROL
• 2 or 4-channel transmitter with double coding,
Advanced Rolling Code and Rolling Code, with green
interchangeable cover with soft lines and essential design
• The new ARC coding guarantees maximum security
due to the length of the transmitted code (128 bit)
and the high number of possible combinations
• The transmitter has ARC coding as factory setting.
However, it is possible to change the coding by using it in
Rolling Code or even in mixed coding (ARC and Rolling Code)
• If using mixed coding, the ARC can be set with the T1/T3
buttons and the Rolling Code with the T2/T4 buttons
• The HAPPY.4VA model allows users to set up to 9 channels,
thanks to the option of activating the command by
simultaneously pressing two buttons chosen by the user.
This function allows avoiding accidental openings caused
by pressing a button by mistake and is particularly
indicated for use with alarm systems
• Covers in three different colours are available
as accessories, respectively for the version
with 2 or 4 channels. (FLIP.2/FLIP.4)
• Easy access to the battery and to the transmitter type,
located on the front under the coloured cover
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code, Rolling Code
and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
4-channel receiver with
full-range power supply
(115-230 VAC/DC) and
triple coding: Advanced
Rolling Code, Rolling
Code and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
in box. 512 memorisable
codes.
Package of 2-channel
covers for HAPPY
transmitters.
Contains 10 pieces
for each available
colour: orange, light
blue and yellow.
Package of 30 pcs.
Package of 4-channel
covers for HAPPY
transmitters.
Contains 10 pieces
for each available
colour: orange, light
blue and yellow.
Package of 30 pcs.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
plug-in. 512 memorisable
codes.
TRANSMITTERS WITH DOUBLE CODING,
ADVANCED ROLLING CODE AND ROLLING CODE
2 and 4 channels
Guide to change coding
and the use of mixed coding
with HAPPY.VA transmitters.
Watch the video.
Configurazione e lista
dei canali disponibili:
hidden
button
184
HAPPY VA
HAPPY.2VA | HAPPY.4VA
ONE.2WO ONE.4WBONE.2WBFLIP.2 FLIP.4 ONE.2WI
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
www.beninca.com
/page/happy.html
ELECTRONIC COMMAND & CONTROL
• 2 or 4-channel transmitter with double coding,
Advanced Rolling Code and Rolling Code, with green
interchangeable cover with soft lines and essential design
• The new ARC coding guarantees maximum security
due to the length of the transmitted code (128 bit)
and the high number of possible combinations
• The transmitter has ARC coding as factory setting.
However, it is possible to change the coding by using it in
Rolling Code or even in mixed coding (ARC and Rolling Code)
• If using mixed coding, the ARC can be set with the T1/T3
buttons and the Rolling Code with the T2/T4 buttons
• The HAPPY.4VA model allows users to set up to 9 channels,
thanks to the option of activating the command by
simultaneously pressing two buttons chosen by the user.
This function allows avoiding accidental openings caused
by pressing a button by mistake and is particularly
indicated for use with alarm systems
• Covers in three different colours are available
as accessories, respectively for the version
with 2 or 4 channels. (FLIP.2/FLIP.4)
• Easy access to the battery and to the transmitter type,
located on the front under the coloured cover
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code, Rolling Code
and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
4-channel receiver with
full-range power supply
(115-230 VAC/DC) and
triple coding: Advanced
Rolling Code, Rolling
Code and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
in box. 512 memorisable
codes.
Package of 2-channel
covers for HAPPY
transmitters.
Contains 10 pieces
for each available
colour: orange, light
blue and yellow.
Package of 30 pcs.
Package of 4-channel
covers for HAPPY
transmitters.
Contains 10 pieces
for each available
colour: orange, light
blue and yellow.
Package of 30 pcs.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
plug-in. 512 memorisable
codes.
TRANSMITTERS WITH DOUBLE CODING,
ADVANCED ROLLING CODE AND ROLLING CODE
2 and 4 channels
Guide to change coding
and the use of mixed coding
with HAPPY.VA transmitters.
Watch the video.
Configurazione e lista
dei canali disponibili:
hidden
button
178
ONE.2WB ONE.2WI MEM2048CALLONE.4WBONE.2WO
TO.GO A
TO.GO2A | TO.GO4A | TO.GO2AS | TO.GO4AS
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
www.beninca.com/
page/togo.html
ELECTRONIC COMMAND & CONTROL
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
in box. 512 memorisable
codes.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
plug-in. 512 memorisable
codes.
Additional memory
for up to 2048 codes.
For receivers
of the ONE series.
Four-channel
GSM receiver, up to
4 automations control
without limits of distance.
Makes it possible to use
the device by means
of a mobile telephone.
4-channel receiver with
full-range power supply
(115-230 VAC/DC) and
triple coding: Advanced
Rolling Code, Rolling
Code and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code, Rolling Code
and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
Configuration and list
of available channels:
hidden
button
ADVANCED ROLLING CODE TRANSMITTERS
2 and 4 channels
• 2 or 4-channel transmitter of the TO.GO series
with Advanced Rolling Code
• The new ARC coding guarantees maximum security
due to the length of the transmitted code (128 bit)
and the high number of possible combinations
• The TO.GO4A model allows users to set up to 9 channels,
thanks to the option of activating the command by
simultaneously pressing two buttons chosen by the user.
This function allows avoiding accidental openings caused
by pressing a button by mistake and is particularly
indicated for use with alarm systems
• Equipped with 12 V battery for long lifespan
• Long range, up to 230 m in a free area
• Car accessory (TO.CLIP) or wall accessory (SMART) available
Guide to memorisation
of a TO.GO transmitter
in a receiver or control unit.
Watch the video.
178
ONE.2WB ONE.2WI MEM2048CALLONE.4WBONE.2WO
TO.GO A
TO.GO2A | TO.GO4A | TO.GO2AS | TO.GO4AS
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
www.beninca.com/
page/togo.html
ELECTRONIC COMMAND & CONTROL
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
in box. 512 memorisable
codes.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code and Rolling Code,
plug-in. 512 memorisable
codes.
Additional memory
for up to 2048 codes.
For receivers
of the ONE series.
Four-channel
GSM receiver, up to
4 automations control
without limits of distance.
Makes it possible to use
the device by means
of a mobile telephone.
4-channel receiver with
full-range power supply
(115-230 VAC/DC) and
triple coding: Advanced
Rolling Code, Rolling
Code and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
433.92 MHz receiver
with power supply
12÷28 VDC / 21÷28 VAC,
2 channels with triple
coding: Advanced Rolling
Code, Rolling Code
and Fixed Code,
with outdoor IP54 box.
512 memorisable codes.
Configuration and list
of available channels:
hidden
button
ADVANCED ROLLING CODE TRANSMITTERS
2 and 4 channels
• 2 or 4-channel transmitter of the TO.GO series
with Advanced Rolling Code
• The new ARC coding guarantees maximum security
due to the length of the transmitted code (128 bit)
and the high number of possible combinations
• The TO.GO4A model allows users to set up to 9 channels,
thanks to the option of activating the command by
simultaneously pressing two buttons chosen by the user.
This function allows avoiding accidental openings caused
by pressing a button by mistake and is particularly
indicated for use with alarm systems
• Equipped with 12 V battery for long lifespan
• Long range, up to 230 m in a free area
• Car accessory (TO.CLIP) or wall accessory (SMART) available
Guide to memorisation
of a TO.GO transmitter
in a receiver or control unit.
Watch the video.
IRI.TX
N/A
N/A
N/A
HAPPY
TO.GO