EasyManua.ls Logo

Bennett Read WHISPER User Manual

Bennett Read WHISPER
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER GUIDE
THE SUPER-SILENT, ULTRA-POWERFUL SOLUTION
FOR PREMIUM HOME CLEANING
Question and Answer IconNeed help?

Do you have a question about the Bennett Read WHISPER and is the answer not in the manual?

Bennett Read WHISPER Specifications

General IconGeneral
Wattage700W
Cord Length7.5m
Dust Capacity2.5L
ModelWHISPER
CategoryVacuum Cleaner
BrandBennett Read
Power700W
Filter TypeHEPA
FiltrationHEPA

Summary

Important Safety Instructions

General Safety Precautions

Observe basic safety precautions when using the vacuum cleaner, including keeping children away.

Fire, Electric Shock, and Injury Risks

Avoid risks of fire, electric shock, or injury by following specific usage guidelines and warnings.

Specific Usage Warnings

Adhere to warnings regarding liquid vacuuming, moving parts, and proper handling of the appliance.

Product View and Components

Assembly and Setup

Pre-motor Filter Installation

Slide the pre-motor filter into the slot from the top and clip it into place.

Post-motor HEPA Filter Installation

Slide the HEPA filter in and press down gently to clip it into place.

Dust Bag Installation

Insert the front plastic housing of the Dust Bag into the machine until it clips into place.

Connecting the Flex-hose

Connect the flex-hose (5) to the vacuum by inserting the hose connector (6) into the suction inlet (18).

Connecting the Extension Wand

Connect hose handle (4) to the end of the extension wand (2) and twist slightly to tighten.

Extending the Extension Wand

To extend, hold the grip and push it away. To retract, pull it towards you.

Connecting the Floor Nozzle

Connect floor nozzle (1) to the end of the extension wand (2) and twist slightly to tighten.

Storing the Vacuum

Insert the storage clip (on the back of the floor nozzle) into the storage slot on the rear of the vacuum.

Operations and Controls

Power Cord Operation

Gently pull out the power cord. Stop pulling when the yellow line is visible.

Power Button Function

Turn the power ON or OFF by pressing lightly downward on the power button.

Variable Suction Control

The power button also controls the suction power. Settings 1 and 2 are for delicate areas and fabrics.

Suction Power Settings

Settings 3 is for fitted carpets. Settings 4 and 5 are for hard floors.

Air Flow Regulator

Slide the regulator up to reduce suction for delicate fabrics, or close for full suction.

Special Tools Usage

Floor Nozzle Usage

Use to vacuum carpets, rugs and bare floors. Swivel head turns to get into tight spaces.

Dusting Brush Usage

Use to clean cornices, skirtings and tight spaces.

Upholstery Tool Usage

Use to clean curtains, draperies, cushions and fabrics.

Crevice Tool Usage

Use the crevice tool in tight, narrow spaces.

Pet Turbobrush Usage

Ideal for removing pet hair from furniture.

Maintenance and Care

Emptying the Dust Bag

Unplug the vacuum, remove the hose, then empty the dust bag.

Dust Bag Maintenance

Empty the dust bag regularly. It can be rinsed under running water and must dry completely.

Pre-motor Filter Cleaning

Unplug the vacuum, open the lid, remove the dust bag, and pull out the pre-motor filter.

Filter Replacement Caution

The HEPA filter is not washable. Use only recommended replacement filters.

Critical Filter Warning

Do not operate without filters or with wet filters. Serious damage will result and void warranty.

Troubleshooting and Guarantee

Machine Overheating

Machine switches off due to dirty filters or dust bag. Allow to cool down.

Consumer Guarantee

Your vacuum has a 24-month guarantee. Contact Tevo for service enquiries.

Related product manuals