- 23 -
3.2.13.2. Video performance
Item Condition Spec OK N.A Remark
Max. support Pixel rate
195 MHz/ Analog
165MHz / DVI
√
Max. Resolution
1920x1080@60
√
Both for analog and
digital inputs
Rise time + Fall time
<12 ns
(50% of minimum pixel
clock period)
√
1920 x 1080 @
60Hz
(max. support
timing)
Settling Time after
overshoot /undershoot
< 5% final full-scale
value
√
Refer to VESA
VSIS Standard
V1R1
Overshoot/Undershoot
< 12% of step function
voltage level over the
full voltage range
√
Refer to VESA
VSIS Standard
V1R1
3.2.14. PANEL INSPECTION CRITERIA
Note:
This Panel Specification is subject to change. Please check it on eSupport system for latest update.
Inspection Item Specification
Line defect Can’t be seen
Bright Dot <=2 dots
Green bright
dots
<=2 dots
Dark dots <=4 dots
Total dots defect <=5 dots
Continuous
Defect
Two continuous bright dots(vertical ,horizontal, oblique):<=1
pair
Exclude continuous green-green bright dots
Three or more continuous bright dots (vertical,
horizontal ,oblique):Not allowed
Two continuous dark dots(vertical ,horizontal, oblique):<=2
pairs
Three or more continuous dark dots(vertical, horizontal,
oblique):Not allowed
Distance between 2B dots:>=15mm
Distance between 2Ddots:>=15mm
Distance between B and D dot :>=10mm
To Next Page
