Operation
72
Using settings menu
This menu is to set the projector’s operating environment.
Using the menu
1. To open the OSD menu, press / to select Settings icon in home screen.
2. When the OSD is displayed, press / to select any item in the main menu.
3. After selecting the desired main menu item, press OK to enter the feature settings
sub-menu.
4. Press / to select the desired item and press OK to open the pop-up menu.
5. Select the settings using / / / and press OK to confirm. Once the setting is
selected, the OSD menu returns to the selected item.
6. Press to return to the main menu.
You may press to go back to home screen directly.
7. Press again to go back to home screen.
To Next Page
Loading...
