37
4. Power Consumption:
8.2 Power consumption
Max. 322W
Standby
1W Max. at 100 ~ 240VAC
(disable loop through)
Normal
Typical 297W@110Vac
ECO
Typical 236W@110Vac
5. OPERATIONAL INSPECTION CRITERIA:
No
Description
Class
1 Noise
1.1
When power on or power off, fan or color wheel get abnormal noise. Major
1.2
When normal operation, noise exceed noise level (refer to Q201 document)
Major
2 Display Quality
(include input: Video, S-video, YPbPr, HDMI, and D-sub
or RGB)
2.1
Focus range out of specification
Major
2.2
Focus fail (focus not clear or flare/ defocus/ lateral color out of
specification)
Major
2.3
Brightness & Uniformity
---
out
of specification.
Major
2.4
Contrast ratio
---
out of specification
Major
2.5
Color coordinates
---
out of specification.
Major
2.6
Light leakage out of specification (active area or out of active area) Major
2.7
Throw ratio out of specification
Major
2.8
Room ratio out of specification
Major
2.9
Picture distortion out of specification
Major
2.10
DMD image out of specification
Major
2.11
Picture dust or other image quality out of specification
Major
2.12
Gray stage check
---
Missing stage
Major
2.13
Video noise
---
If video noise presented
Major
2.14
DDC data error / incorrect Major
2.15
Mode detection error Major
2.16
OSD Malfunction Major
3 Audio Quality
3.1
Audio malfunction Major
3.2
Speaker no function Major
3.4
Volume mute malfunction
Major
4 Remote control malfunction
Major
To Next Page
