BenQ MS500 - Appendix 2 - Code List: IR; RS232; DDC Data

98
Appendix 2 - Code List: IR / RS232 / DDC Data
Remote Control Code:
1. IR Code
Key Function
Description
Code Support ID and Protocol
1
Power This button will on/off the projector.
0x02
Y
es Frequency 38 KHz
2
Source
This button will show available source
options.
0x04
Y
es Protocol NEC Format
3
Auto
This button will automatically adjust
projector’s picture quality.
0x08 Yes
Custom
Code
0x0030
4
Blank
This button will turn projector into/out
of blank mode.
0x07 Yes
5
Mode
When there is no OSD menu on the
screen, the button will change picture
mode.
When there is OSD menu on the screen,
this button will excite the item chooser.
0x10 Yes
6
Menu/Exit
This button will turn on/off OSD
menu.
0x0F Yes
7
Right
This button will move the chooser item
to the right one.
0x0E Yes
8
Left
When there is OSD menu on screen,
this button will move the chooser item
to the left one.
0x0D Yes
9
Up
When there is no OSD on screen, this
button will correct optical keystone in
negative direction.
When there is OSD menu on screen,
this button will move the chooser item
to the upper one.
0x0B Yes
10
Down
When there is no OSD on screen, this
button will correct optical keystone in
positive direction.
When there is OSD menu on the screen,
this button will move the chooser item
to the next one.
0x0C Yes
11
Freeze
This button will freeze/ unfreeze the
image.
0x03 Yes
12
Volum e +
This button will magnify the volume
gradually.
0x82 Yes
13
Volum e -
This button will reduce the volume
gradually.
0x83 Yes
14
Timer on
When the presentation timer is off , this
button will activate/ stop the timer.
When the presentation timer is on , this
button will restart, continue or turn off
the timer.
0x25 Yes
15
Timer Setup
This button will activate the
“Presentation Timer” setting.
0x26 Yes
16
Digital Zoom
+
This button will show unsupported
logo.
0x18 Yes
17
Digital Zoom
-
This button will show unsupported
logo.
0x19 Yes
18
Page Up
By pressing “Page Up” button, could
enable Page Up function.
0x05 Yes
19
Page Down
By pressing “Page Down” button, could
enable Page Down function.
0x06 Yes