BenQ MS527E - User Manual

Questions and Answers

B
Brendan JamesAug 11, 2025
What to do if my BenQ Projector has no picture?
- R
  reyesbrandonAug 11, 2025
  If your BenQ Projector isn't displaying a picture, several things could be the cause. First, ensure that your video source is turned on and the signal cable is correctly connected. Check that the projector is correctly connected to the input signal device. Also, make sure the correct input signal is selected using the SOURCE key on the projector or remote. Finally, verify that the lens cover is open.
B
Barbara GilesAug 18, 2025
Why won't my BenQ MS527E turn on?
- T
  Travis RussellAug 18, 2025
  If your BenQ Projector isn't turning on, start by checking the power connections. Ensure the power cord is securely plugged into both the AC inlet on the projector and the power outlet, and that the power outlet switch is on, if applicable. Also, if you've recently tried turning it on and it didn't work, it might be in the cooling process. Wait until the cooling down process has completed before attempting to turn it on again.
S
Suzanne ManningAug 26, 2025
How to fix a blurred image on my BenQ Projector?
- M
  mcgeejosephAug 26, 2025
  To fix a blurred image on your BenQ Projector, begin by adjusting the focus of the lens using the focus ring. Also, make sure that the projector and the screen are aligned properly; adjust the projection angle, direction, and height of the unit if needed. Finally, ensure that the lens cover is open.
M
Melvin PonceSep 2, 2025
What to do if the BenQ Projector remote control does not work?
- M
  Mindy NguyenSep 2, 2025
  If your BenQ Projector's remote control isn't working, try these steps: First, replace the battery with a new one. Then, make sure there isn't anything blocking the path between the remote and the projector. Finally, ensure you are within 8 meters (26 feet) of the projector.

BenQ MS527E Specifications

General

Brightness	3200 ANSI Lumens
Supported Resolutions	VGA(640 x 480) to UXGA(1600 x 1200)
Contrast Ratio	13000:1
Lamp Life (Normal Mode)	4000 hours
Lamp Life (Eco Mode)	6000 hours
Lamp Life (SmartEco Mode)	10000 hours
Display Type	DLP
Zoom Ratio	1.1x
Noise Level (Economic mode)	29 dB
Power Consumption (Standby mode)	0.5 W
Keystone Correction	Vertical: ± 40 degrees
Connectivity/Input Ports	HDMI, VGA, USB, Composite Video, Audio In
Aspect Ratio	4:3 (native), 16:9 (compatible)
I/O Ports	HDMI, VGA, USB, Composite Video, Audio In
Projection Size	30" ~ 300"
Output Ports	Audio Out
Resolution	SVGA (800 x 600)
Throw Ratio	1.96 - 2.15:1