Operation
30
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various
adjustments and settings.
Below is the overview of the OSD menu.
The following example describes how to set the OSD language.
1. Press MENU/EXIT on the
projector or remote control to turn
the OSD menu on.
3. Press to highlight
Language and press Enter
to select a preferred language.
2. Use / to highlight the
SYSTEM SETUP: Basic menu.
4. Press MENU/EXIT twice*
on the projector or remote
control to leave and save the
settings.
*The first press leads you back to
the main menu and the second
press closes the OSD menu.
Current input
Main menu icon
Main menu
Sub-menu
Highlight
Press
MENU/
EXIT to
the
previous
page or to
exit.
Status
To Next Page
Loading...
