46
Personal computer or laptop computer
Software required
1. DLP Composer Lite program
2. New version FW
Download procedure
1. Connect RS-232 cable to PC and projector
2. Let projector be in Download Mode:
- Press and hold keypad-POWER and AUTO at the same time, then plug in power cord.
- Power LED will show Green for around 1 sec, then show Red continuously.
3. Execute DLP Composer Lite 9.2 program
4. To select the RS-232 communications interface, choose "Preferences" from the "Edit" menu,
click the "Communications" page and choose "Serial Port".
To Next Page
