BenQ MS500 - Page 72

72
7.6 Assemble “Sponge Antidust” well (Fig. 7-5).
Fig.7-5-4
Fig.7-5-2
7.7 Assemble “PL Lens” and lock with screws well (Fig. 7-6).
i. Assemble Lens and the Assembly direction must be horizontal，and do not impact CM.
ii. Pre-fastening Screws firstly. Screw Torque must be confirmed to be 1-2 kg-cm.
(Fig. 7-6)
iii. Fastening the Screws well. Screw Torque must be confirmed to be 2.5-3.5 kg-cm. (Fig.
7-6)
Fixed shafts of
DMD HSG
Sponge Antidust
The sponge can’t
cover the hole of
HSG DMD