61 Navigating the main menu
HDR Demo (Works only if the input content is HDR-compatible)
When the function is activated, all color modes are available
for a comparison between HDR and non-HDR image
representation. See HDR Demo options and HDR function
availability on page 62 for more information.
If this function is activated and a non-HDR mode is selected, the
input HDR content may be represented inappropriately.
• ON
• OFF
Auto
Switch
Once enabled, the specific port will be in the input auto
select loop. Otherwise, it can only be selected by input select
or by hot key.
Available only when KVM Switch > Video Input is set to None.
• DP Auto
Switch
• HDMI Auto
Switch
Ergonomics Smart
Reminder
Decides to display the pop-up message that
reminds you to rest your eyes.
• ON
• OFF
Time
Interval
(min.)
Sets the interval of the reminder message. • 20
• 40
• 60
• 80
• 100
Duration
(sec.)
Sets the time the reminder message lasts on
the screen.
• 5
• 10
• 15
• 20
• 25
Power
Awake
If this function is disabled, the Thunderbolt™ 3 / USB ports
are not supplied with power while the monitor is in standby
mode.
To keep supplying power to the Thunderbolt™ 3 / USB ports
in monitor’s standby mode, change the setting to ON.
• Thunderbolt
3
• USB
Advanced DDC/CI Allows the monitor settings to be set through
the software on the PC.
DDC/CI, short for Display Data
Channel/Command Interface, which was
developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows
monitor controls to be sent via the software for
remote diagnostics.
• ON
• OFF
Item Function Range
To Next Page
Loading...
Need help?
General
