Preparation for Setup 13
Driver Installation
When you are the first time to use this PointWrite Module, please install set-
up driver for Configuration setting.
1. Please go to below BenQ Display Website to download PointWrire Set-
up driver https://business-display.benq.com/en/findproduct/projector/
accessory/pointwrite-pt20.html
Go to BenQ Website >> Search PT20 >> Go to “Download Page”.
2. Follow the on-screen instructions to install the driver.
3. Complete the installation.
Driver Installation Complete
The PointWrite icon will be created on the desktop.
The installation folder will be created on C: directory.
• 64-bit Windows: C:\Program Files (x86)\BenQ\PointWrite 2.0
• 32-bit Windows: C:\Program Files\BenQ\PointWrite 2.0
Remark:
Only First time using the PointWrite module need to install set-up driver for
Configuration setting, the subsequent users can only plug the USB cable to
connect to PC to start the interaction quickly without driver installation.
To Next Page
Loading...
