7
Installing a camera mount
Check the mounting component list before installing:
Upper mount Lower mount 1/4" screw (8mm) M3x5 mm screw x 3
To install the camera mount:
1. Place your camera onto the upper mount
and secure the camera by screwing the 1/4"
screw into the camera’s screw hole.
2. Install the lower mount with two M3x5mm
screws and secure it on the top of the
display.
3. Insert your camera with the upper mount
attached into the lower mount.
4. Secure the camera mount by screwing a
M3x5mm screw into the screw hole at the
left side of the upper mount.
To Next Page
Loading...
