14
Connections
Connecting power
1. Plug one end of the power cord into the power jack on the display and the other end into an
appropriate power outlet.
2. Set the power switch to ON (I). The system will enter standby mode.
AC IN
2
1
• The supplied power cord is suitable for use with 110-240V AC power only.
• The power cord and outlet illustrated may differ from the ones used in your region.
• Only use an appropriate power cord for your region. Never use a power cord which appears damaged or
frayed, or change the plug type on the power cord.
• Be aware of the power loading when you use extension cords or multiple outlet power boards.
• There are no user serviceable parts in this display. Never unscrew or remove any covers. There are
dangerous voltages inside the display. Turn off the power and unplug the power cord if you intend to move
the display.
To Next Page
