BenQ RP6504 - Connecting the VGA Input; Connecting the Digital Inputs

16
Connecting the VGA input
1. Connect the VGA port on the display to the VGA output port on a computer using a D-Sub
(15-pin) cable.
2. Connect the computer’s audio output port to the PC AUDIO-IN jack on the display using a
suitable audio cable.
VGA
Connecting the digital inputs
1. Connect the HDMI or DisplayPort output port of a computer or A/V device (such as a settop
box or DVD player) to the HDMI 1/HDMI 2/HDMI/IN(DP) input port on the display using an
HDMI or DisplayPort cable.
2. To view video from this input, press on the remote control to switch to the respective
input source.
or