BenQ ST4301K - Operations in the OSD Menu

Basic operations 23
Operations in the OSD menu
Using the control panel buttons Using the remote control
1. Press MENU to open the OSD menu. 1. Press MENU to open the OSD menu.
2. In the OSD menu, press  or  to
select an item.
2. Press  or  to select an item.
3. Press INPUT to confirm selections.
3. Press INPUT to confirm selections.
4. Press or  to adjust settings and
press  or  to select a feature.
Press INPUT to save changes.
4. Press  and  to select a feature
and press  or  to adjust settings.
Press OK to confirm changes.
5. Press MENU to close the OSD
menu.
5. Press
BACK to close the OSD menu.
USB4
USB3USB3.0
USB2 USB1 Coaxial-OUT AC-IN
HDMI3
HDMI2ARC
HDMI1AUDIO-RAUDIO-LVIDEO AUDIO-OUT
AV-IN
OFF/ON LAN
MENU
INPUT
USB4
USB3USB3.0
USB2 USB1 Coaxial-OUT AC-IN
HDMI3
HDMI2ARC
HDMI1AUDIO-RAUDIO-LVIDEO AUDIO-OUT
AV-IN
OFF/ON LAN
MENU
INPUT
USB4
USB3USB3.0
USB2 USB1 Coaxial-OUT AC-IN
HDMI3
HDMI2ARC
HDMI1AUDIO-RAUDIO-LVIDEO AUDIO-OUT
AV-IN
OFF/ON LAN
MENU
INPUT
USB4
USB3USB3.0
USB2 USB1 Coaxial-OUT AC-IN
HDMI3
HDMI2ARC
HDMI1AUDIO-RAUDIO-LVIDEO AUDIO-OUT
AV-IN
OFF/ON LAN
MENU
INPUT
USB4
USB3USB3.0
USB2 USB1 Coaxial-OUT AC-IN
HDMI3
HDMI2ARC
HDMI1AUDIO-RAUDIO-LVIDEO AUDIO-OUT
AV-IN
OFF/ON LAN
MENU
INPUT