BenQ W1050 User Manual (English)

Other manuals for BenQ W1050

Questions and Answers:

D
Donna MorganJul 28, 2025
Why BenQ Digital projector has no picture?
- C
  Cameron ValdezJul 28, 2025
  If your BenQ Digital projector displays no picture, the video source might not be turned on or connected correctly. Ensure the video source is on and the signal cable is properly connected. Also, the projector might not be correctly connected to the input signal device, so check the connection. Finally, the input signal might not be correctly selected; use the SOURCE key on the projector or remote control to select the correct input signal.
R
Robert CookAug 4, 2025
What to do if BenQ Digital projector does not turn on?
- C
  courtney36Aug 4, 2025
  If your BenQ Digital projector doesn't turn on, first ensure the power cord is correctly plugged into the AC inlet on the projector and the power outlet. If the outlet has a switch, make sure it's on. Also, if you've recently turned the projector off, wait until the cooling down process has completed before attempting to turn it on again.
P
phillipsbradAug 12, 2025
What to do if BenQ Digital projector remote control does not work?
- B
  Brandon WhiteAug 12, 2025
  If the remote control for your BenQ Digital projector isn't working, first replace the battery with a new one. If that doesn't work, check for any obstacles between the remote control and the projector and remove them. Also, make sure you are within 8 meters (26 feet) of the projector.
S
smithlucasAug 20, 2025
Why is BenQ Digital projector image blurred?
- E
  Erica HerreraAug 20, 2025
  If the image from your BenQ Digital projector is blurred, it could be due to the projection lens not being correctly focused. Adjust the focus of the lens using the focus ring. Additionally, the projector and the screen might not be aligned properly; adjust the projection angle, direction, and height of the unit if necessary.

BenQ W1050 Specifications

General

Matrix type	DMD
Number of colors	1.073 billion colors
Native aspect ratio	16:9
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	15000:1
Screen size compatibility	60 - 300 \
Projector native resolution	1080p (1920x1080)
Keystone correction, vertical	-40 - 40 °
Vertical synchronization (max)	0.12 kHz
Vertical synchronization (min)	0.023 kHz
Horizontal synchronization (max)	102 kHz
Horizontal synchronization (min)	15 kHz
Offset	107 %
Throw ratio	1.37 - 1.64:1
Focal length range	19 - 22.65 mm
Aperture range (F-F)	2.42 - 2.62
3D	-
Full HD	Yes
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	640 x 480 (VGA), 1920 x 1200 (WUXGA)
DVI port	No
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	0
RMS rated power	2 W
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Market positioning	Home cinema
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	260 W
Power consumption (standby)	0.5 W
Power consumption (typical)	252 W
Power consumption (economy mode)	211 W
Lamp type	UHP
Lamp power	210 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	4500 h
Service life of light source (economic mode)	6000 h
Noise level	33 dB
Certification	CE, TÜV-Bauart
Noise level (economic mode)	31 dB
On Screen Display (OSD) languages	ARA, BUL, CHI (SIMPL), CHI (TR), CRO, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HIN, HUN, IND, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SWE, THA, TUR
Cables included	AC, VGA
Remote control type	IR
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %