bentrup TC507 - Page 22

22
DIx: Displays a group of 8 digital inputs
AIx: Displays a group of 8 analog inputs
MIXER: Displays the status of the atmosphere mixer
FLWRT: Displays a flow ratio
KWH: Displays the power pickup
VOL.: Displays a media flow volume
RTC: Displays real time / calendar
PLC.S: Displays various PLC status information
following parameters apply on selection VAL only:
11: display value
(value range SP00 to CH19)
Selects the process value to be shown
following parameters apply on selection VAL-B only:
21: display value
(value range SP00 to CH19)
Selects the process value to be shown
following parameters apply on selection VALx2 only:
31: display value
(value range SP00 to CH19)
Selects the process value to be shown
following parameters apply on selection CHAN only:
41: channel info
(value range CH00 to CH02)
Selects the channel to be shown
following parameters apply on selection DOx only:
51: DOx output
(value range DO0 to DO0)
Selects a digital output (bit) to display
following parameters apply on selection AOx only:
61: AOx output
(value range AO0 to AO0)
Selects an analog output to display
following parameters apply on selection MOT only:
71: step.mot.info
(value range SM0 to SM5)
Used to display position and movement of a servomotor. The parameter selects the column number of the
digital output which must be defined for servomotor operation
following parameters apply on selection DIx only:
91: DIx input
(value range DI0 to DI0)
Selects a digital input (bit) to display
following parameters apply on selection AIx only:
101: AIx input
(value range AI0 to AI0)
Selects an analog input to display
following parameters apply on selection MIXER only:
111: info type
(value range 0 to 9)
no explanation available
following parameters apply on selection FLWRT only:
121: display value
(value range SP00 to CH19)