LED surgical lights, single and combination lights CHROMOPHARE
®
E 778, E 668, E 558
Maintenance and inspection
84
CAUTION!
Improper use of disinfection products can lead
to product damage!
Not following or adhering to the information and
instructions in this chapter can result in product
damage!
It also voids any implied warranty claims!
Therefore:
– When cleaning and disinfecting, make sure
that no liquid penetrates the light head or
support system components.
– The surface disinfectants may only be used in
the concentration prescribed by the manufact-
urer.
– The use of NATRONLAUGE can cause surface
changes on coated aluminum components
and impair the service life of the product.
– If the surface disinfectant is used incorrectly
,
such that a large amount of liquid remains on
the surface, it will cause increased coating
dissolution because the product is continually
"shifted" around the surface but never
removed. In case of an increased layer
composition of surface disinfectant, it must be
thoroughly cleansed.
To Next Page
Loading...
