Bernard Controls EZ100 - User Manual

INSTRUCTIONS DE MISE EN SERVICE,
STOCKAGE ET ENTRETIEN
INSTRUCTIONS FOR START-UP,
STORAGE AND MAINTENANCE
ANLEITUNG FÜR DIE INBETRIEBNAHME,
LAGERUNG UND WARTUNG
NR 1208_EZ_revB_A/F/D Art: 5100134
EZ
Gamme
Range
Reihe

Bernard Controls EZ100 Specifications

General

Brand	Bernard Controls
Model	EZ100
Category	Controller
Language	English

Summary

Safety Information

Handwheel Operation and Declutching

Commissioning for On;Off Actuator

Electrical Connections and Preliminary Tests

Details electrical connections, preliminary checks, and component wiring.

Setting of Mechanical Stops and Travel Limit Switches

Explains setting mechanical stops and travel limit switches for actuator operation.

Mechanical Stops and Travel Limit Switches Setting Procedure

Position Feedback Potentiometer (Option)

On Support Column Mounted Version (EZ4 to EZ15)

Circuit Board Mounted Version

TAM Position Transmitter (Option)

Electric Connections

Signal Inversion

Commissioning - Actuator with MINIGAM Positionner

Description

Notes Regarding the Electrical Connections

Important notes on electrical connections for MINIGAM+ actuators.

MINIGAM+ Configuration

Setting of Mechanical Stops and Travel Limit Switches

Setting of Remote Position Signal

Setting of Closed Position (0%)

Procedure to set the closed position (0%) for the remote position signal.

Setting of Open Position (100%)

Dead Band Setting

Troubleshooting