Bernard Controls OAP

instructions de mise en service,
stockage et entretien
instructions for start-up,
storage and maintenance
anleitung für die inbetriebnahme,
lagerung und wartung
modèles / models / modelle :
oa, oap, as, asp, bs, sra, src, asm
TMS300_SD_revE_A/F/D
SD
Gamme
Range
Reihe

Bernard Controls OAP Specifications

General

Brand	Bernard Controls
Model	OAP
Category	Controller
Language	English

Summary

Instructions for Start-Up, Storage and Maintenance

Safety Information

Explosionproof Actuator Warnings

Read special instructions TMS1132 for explosionproof actuators before mounting and starting.

Assembly

Mounting and Positioning Guidelines

Secure actuator to valve, avoid upward cable glands, and motor bottom placement.

Handwheel Operation and Declutching

Electrical Connections and Preliminary Tests

Pre-Test Checks and Operation Verification

Verify supply voltage, cable glands, manual half-open, and electrical open/close limits.

Setting Mechanical Stops and Travel Limit Switches

Mechanical Stops and Travel Limit Switch Setup

Adjust mechanical stops and travel limit switch cams for proper valve operation and safety.

Setting Torque Limit Switches

Torque Limit Switch Adjustment

Adjust torque limit switches by rotating nuts compressing torque springs to increase or decrease torque.

TAM Position Transmitter (Option)

TAM Transmitter Electrical Connections

TAM Transmitter Settings

Adjust the 0/4mA and 20mA output signals for the TAM transmitter.

Maintenance and Storage Instructions

Actuator Maintenance