Need help?Do you have a question about the Bernard Controls AQ Logic Series and is the answer not in the manual?
General| Brand | Bernard Controls |
|---|---|
| Model | AQ Logic Series |
| Category | Controller |
| Language | English |
Actuator should be secured directly to the valve using proper bolts or via a proper interface.
You need to open the control compartment and remove the cover in order to wire the actuator.
Ensure wires are not supplied with electric power before wiring is finished and the control compartment is closed.
AQ Logic control panel consists of a screen, 2 control knobs, 1 control selector and 2 configurable LEDs.
AQ logic can be controlled locally or remotely. Mode is set using Control selector on the control panel.
Operation screen indicates status, current position, and torque level. Knobs are used for operation and menu navigation.
Using the Bluetooth® connection of your actuator, you can operate it with Bernard Control smartphone application (BC App).
The AQ Logic remote control system can be operated using an external or an internal voltage supply.
To Next Page