Bernard Controls AQ Logic Series User Manual

English
38
5.9 Set Analog Input / Output (OPTION)
To set analog input/ouput, go to Settings >
Analog input/output and set the different
options necessary.
5.9.1 Activate positioner
If present, the actuator can operate as a positioner using a
proportional command, such as a 4-20 mA analogue signal.
How to activate positioner
1. From Analog Input/Output menu, enter Positioner
Activation.
2. The Positioner Activation screen appears.
3. Select Enable then validate with OK.
4. Go to Save then validate with OK.
The Positioner Activation confirmation screen appears.
5. Select YES then validate with OK.
You go back to Analog Input/Output menu.

Bernard Controls AQ Logic Series Specifications

General

Brand	Bernard Controls
Model	AQ Logic Series
Category	Controller
Language	English