5
1 SAFETY
This device complies with current applicable safety standards.
Installation, maintenance, and use of this unit require a skilled and
trained staff.
Please carefully read this whole document before mounting and
starting-up the actuator.
2 DELIVERY, STORAGE AND MAINTENANCE
2.1 Delivery
AQ actuators are delivered in a cardboard box of a size equivalent to
the actuator and sit in a cardboard wedge.
2.1.1 Check identification sticker
Information on the nameplate sticker on the side of the actuator
should match those on your order.
QR Code on this sticker can be used to identify the actuator.
2.2 Storage
Actuators should be stored under a shelter, in a clean and dry place
and at a stable ambient temperature.
Avoid placing the actuator directly on the floor
Check that plugs of cable entries are correctly tightened.
Check that cover screws are correctly tightened to ensure
weatherproof sealing of the cover
AQ actuator includes electrical components and lubricated gear
stages. Even with a weatherproof enclosure, oxidation, seizing and
other alterations may occur if actuator is not correctly stored.
Heating resistor should be connected to power supply especially if
the storage place is wet.
To Next Page
Loading...
