Bernina Bernette 25 - User Manual

Other manuals for Bernina Bernette 25

Quick Start Guide10 pages

Questions and Answers

W
wreyesAug 21, 2025
What to do if my Bernina Sewing Machine is skipping stitches?
- C
  Charlene SanchezAug 22, 2025
  If your Bernina Sewing Machine is skipping stitches, there are several potential causes. Make sure the needle is correctly inserted with the flat side towards the back. A damaged needle can also cause this, so insert a new one. Ensure you are using the correct size needle for the thread. Also, check that the foot is correctly attached. Rethread the machine to ensure it's threaded correctly. Finally, adjust the presser foot pressure if it's not strong enough.
D
Denise EdwardsSep 4, 2025
How to fix loose stitches on my Bernina Bernette 25?
- D
  deanna33Sep 4, 2025
  Loose stitches on your Bernina Sewing Machine can be caused by several factors. First, check the threading of the machine to ensure it is correct. Also, make sure the bobbin case is threaded as illustrated. The needle, fabric, and thread combination must be correct, ensuring the needle size suits the fabric and thread. Finally, the thread tension might be wrong, so correct it.
O
odoughertySep 2, 2025
Why does the lower thread keep breaking on my Bernina Bernette 25?
- H
  Heather SmithSep 2, 2025
  If the lower thread breaks on your Bernina Sewing Machine, it might be because the bobbin case isn't inserted correctly. Remove and reinsert the bobbin case, then pull on the thread to ensure it pulls easily. Also, check that the bobbin case is threaded correctly. Finally, the lower thread tension might be too tight; adjust the thread tension as described.
J
Jeremy OsborneSep 1, 2025
How to fix seam puckering on my Bernina Sewing Machine?
- S
  Steven CastroSep 1, 2025
  Seam puckering on your Bernina Sewing Machine can occur due to a few reasons. If the needle thread tension is too tight, loosen it. Ensure the needle thread is correctly threaded; if not, rethread the machine. If the needle is too heavy for the fabric, choose a needle suitable for the thread and fabric. If the stitch length is too long for the fabric, make the stitch denser. Also, ensure that the presser foot pressure is correctly adjusted.
K
Katherine NielsenAug 30, 2025
Why does the upper thread keep breaking on my Bernina Bernette 25 Sewing Machine?
- P
  Paula NolanAug 31, 2025
  If the upper thread breaks on your Bernina Sewing Machine, several factors could be the cause. First, ensure the machine is threaded correctly; if not, rethread it. Also, check the thread tension; if it's too tight, reduce it. The thread might be too thick for the needle, so select a larger needle. Verify the needle is correctly inserted with the flat side towards the back. Make sure the thread isn't wound around the spool pin; if it is, remove the reel and wind the thread onto it. Finally, inspect the needle for damage and replace it if necessary.
V
vhicksAug 29, 2025
What causes seam puckering on my Bernina Sewing Machine?
- B
  Brandon SandersAug 29, 2025
  Seam puckering on your Bernina Sewing Machine can be caused by several factors. The needle thread tension might be too tight, so loosen it. Ensure the needle thread is correctly threaded by rethreading the machine. If the needle is too heavy for the fabric, choose a needle to suit the thread and fabric. If the stitch length is too long for the fabric, make the stitch denser. Adjusting the presser foot pressure may also help.
A
Anna EwingAug 27, 2025
Why are my seams gathering or puckering on my Bernina Bernette 25?
- C
  Carolyn PaulAug 28, 2025
  Seam gathering or puckering on your Bernina Sewing Machine can occur if the needle is too thick for the fabric; select a finer needle. Also, check and readjust the stitch length if it's not correct. If the thread tension is too tight, loosen it.
M
Mary RuizAug 27, 2025
What to do if my Bernina Bernette 25 Sewing Machine jams?
- H
  Heather LeeAug 27, 2025
  If your Bernina Sewing Machine jams, it's possible that thread is caught in the hook. Remove the upper thread and bobbin case, turn the handwheel backwards and forwards by hand, and remove any thread remnants.
L
Lisa LozanoAug 25, 2025
Why does the needle keep breaking on my Bernina Bernette 25?
- D
  Dennis OconnellAug 26, 2025
  If the needle breaks on your Bernina Sewing Machine, it could be due to several reasons. A damaged needle should be replaced with a new one. Ensure the needle is correctly inserted with the flat side towards the back. Using the wrong needle size for the fabric can also cause breakage, so choose a needle suitable for the thread and fabric. The wrong foot attachment can also lead to this issue, so select the correct foot. A loose needle clamp screw should be firmly tightened with a screwdriver. Also, ensure the presser foot is appropriate for the stitch pattern you're using. Finally, if the upper thread tension is too tight, loosen it.
M
Mark MillerAug 23, 2025
How to fix skipped stitches on my Bernina Bernette 25?
- D
  David JohnsonAug 23, 2025
  Skipped stitches on your Bernina Sewing Machine can occur due to several reasons. Ensure the needle is correctly inserted with the flat side towards the back, and replace it if it's damaged. Using the wrong size needle can also cause this issue, so choose one that suits the thread. Check that the foot is correctly attached. Rethread the machine to ensure it's done properly. Adjusting the presser foot pressure may also resolve the issue.