Bernina Electronic 1008 - Page 12

MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/12
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
TOPSTITCHING/EDGESTITCHING
Fabric: Firm fabric – 4” x 6”
Needle: 90/14 Embroidery
Thread: 30 wt. cotton embroidery
Contrasting color
Presser Foot: Edgestitch Foot #10 (optional accessory)
Owner’s manual pg.____
• Cut fabric in half to create 2 pieces each 2” x 6”.
• Sew two pieces together with a
5
/8” seam on the 6” sides.
• Press the seam open.
• From the right side, position the blade of the foot in the ditch of the seam.
• Select Triple Straight Stitch #9/red.
• Move the needle position 1 place to the left (half left).
• Sew the length of the seam.
• Select the longest stitch length.
• Move the needle position 2 places to the right (far right).
• Start at the top of the seam as before.
• Sew down the length of the seam again.