MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/40
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
SHELL EDGE
Owner’s manual pg.____
• Select the Blindstitch #3/green -SW 2.5mm - 5mm and SL 1.5mm - 2mm. The longer the stitch
length, the larger the shells.
• Fold under one 6” edge about ½” and press.
• Place fabric to the right and position it under the foot so that the stitch, when it swings to the
left, will just pass over the folded edge.
• On knit fabrics the surplus can be trimmed from the wrong side close to the stitch.
• On woven fabrics it is advisable to first sew a row of small zigzag stitches about ¼” from
where the shell edge will be. Then you will be able to trim close to these stitches after the
edge is finished.
• Trim and mount the sample.
This stitch is suitable for fine, fabrics and is ideal for lingerie and nightwear.
Fabric: Nylon tricot, 6” x 4”
Needle: 80/12 Universal
Thread: All-purpose sewing thread
Presser Foot: Reverse Pattern Foot #1
To Next Page
Loading...
