EasyManua.ls Logo

Bernina Electronic 1008 - Rolled and Whipped Edge

Bernina Electronic 1008
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/41
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
ROLLED AND WHIPPED EDGE
Owner’s manual pg.____
• Clean one 6” edge of “whiskers”
• Select the Zigzag Stitch #2/green - SW 2.5 and SL 1 or less.
• Select the left needle position.
• Loosen the top tension if necessary.
• Place cut edge of fabric between the center and right toes of the presser
foot and sew.
Notes:
- The left swing of the needle should be in the fabric, while the right
swing falls off of the right edge of the fabric.
- As the needle swings left, it should roll the fabric into a tiny rolled edge.
- The finer the fabric, the finer the needle and thread used.
• Trim and mount the sample.
This edge finish is used on a single thickness of fine lightweight fabrics.
It is also use as a seam finish or as an edge on ruffles, hems etc.
Fabric: Lightweight cotton, 6” x 4”
Needle: 80/12 Universal
Thread: All-purpose sewing thread
Presser Foot: Buttonhole Foot #3

Related product manuals